Pump Industry News & Product Updates
We're on top of the pump industry news and product updates so you don't have to. Check back often for the latest pump industry information and make sure to subscribe to our RSS feed. Have company news or product announcements you want to include in this section? Send the release to editors-at-pumpscout.com.
GrowHow, a UK fertilizer manufacturer and chemical process industry supplier, is using a compact C range NOV Mono pump to replace a 30-year old discontinued model from the same pump manufacturer.
Mouvex’s A Series positive displacement pumps offer self-priming, dry-run capabilities, and maintain constant flow rates, regardless of changes in viscosity and pressure. In celebration of the pumps' 50 year anniversary, Mouvex will be launching a new line of A Series pumps, due to be released in September 2015.
The Sulzer pumps are designed specifically to inject hydrocarbons at very high pressures into four salt caverns being developed by Strathcona Storage Limited Partnership.
The pump manufacturer's heavy-duty Godwin dewatering pumps will fill the third set of basin locks on the Pacific Ocean sector with 1.7 billion gallons of water. hen completed, the Panama Canal will include a new traffic lane and two new lock complexes which will double the capacity of the canal.
One of KROHNE’s latest innovations for measuring less than full pipes is the TIDALFLUX flow meter, which will be among the products featured in the manufacturer's WEFTEC booth.
The family-owned German manufacturer will showcase its progressive cavity pumps at the tradeshow, in addition to participating in multiple interactive WEFTEC-sponsored workshops.
SALINO® Pressure Centre equipment is specially designed for reverse osmosis systems. It is the first in the world to combine four main components (high pressure pump, energy recovery device, booster pump, and electric motor) into a single, compact RO system.
A food plant in South Africa solved their pumping challenge of moving peanut butter from the grinder to the holding tank with Watson-Marlow's MasoSine200 progressive cavity pump. The MasoSine pump features a unique sinusoidal rotor that can safely transfer delicate products without degradation.
Liquiflo pumps now carried by Michael Smith Engineers in the United Kingdom, providing smooth and pulseless flows for challenging chemical applications.
A Senior Applications Specialist at Komax reports seeing heat transfer improvements up to 300% with the new slurry heater, designed specifically for lower viscosity fluids. The heat exchanger is also designed to be self-cleaning.
The FRENIC-Mini Drive expands the electronics manufacturer's portfolio of low-voltage inverters in the North American market
The new series offers a modular design that enables seven different product connections and features the PERSWING P air-control system.
EagleBurgmann’s New Generation Cartex Cartridge Seals Utilize HighTech DiamondFace Coating TechnologyJuly 28, 2015
The new eCartex seals use DF-coated seal faces that offer extreme hardness, resistance to wear, and excellent thermal conductivity which results in a high savings potential, reducing energy consumption by up to 80% and increasing the operating period by up to 100%.
The GK-P process pump is an end suction centrifugal process pump uniquely suited to handle a wide variety of chemical liquids.
The screw pumps are specifically designed for the challenging operating conditions of the oil & gas, process, and marine industries. The new series pumps are available in both twin and triplex configurations.
The new diaphragm liquid pump is ideal for inkjet printer applications, providing consistent flow with little pulsation.
The new screw vacuum pump series is uniquely self-cleaning, lessening the maintenance typically associated with this pump type.
NEWater is high-grade reclaimed water produced from treated, used water that is purified using advanced membrane technologies and ultra-violet disinfection. The NEWater initiative hopes to supply 55% of Singapore's water by 2060.
The WWTP operated successfully with NOV Mono pumps installed more than 40 years ago. The plant is now upgrading to NOV Mono's modern pump equivalent.
Grundfos' new line of submersible wastewater pumps are designed to handle raw and unscreened sewage, effluent, and large volumes of surface water.
The new diaphragm pump is specifically designed for use in laboratory applications and the inkjet printing industry, providing fast suction and steady delivery.
The company will showcase several of its metering and transfer pumps at the show, to take place in Chicago this September.
Gala Industries is a top manufacturer of underwater pelletizing system and centrifugal dryers around the world. The company relies on Kenics heat exchangers from NOV in the melt cooling process with predictable, controlled, and efficient thermal transfer.
Blackmer, a PSG Dover brand, recently unveiled its new line of reciprocating gas compressors. The compressors come in a variety of configurations and are built to be highly efficient.
The Dif-jet air system provides necessary aeration to swine farmers, enabling them to avoid health hazards and pollution caused by animal waste.
Saarbrücken GmbH is a waste-heat power plant that recycles around 180,000 tons of waste and generates around 75,000 MWh of electricity. The plant recently started using Watson Marlow's Bredel hose pumps to transfer abrasive brine.
Clyde Union is a well known global pump manufacturer. Its condensate extraction pumps are specifically designed for and suited for use in modern power plants, successfully operating in rigorous pumping environments.
A global organization, Sulzer's acquisition of Precision Gas Turbine will allow the company to service a broader range or gas turbines and access an established set of power customers.
The Waneta Expansion Project adds a second power house to the BC Hydro grid, utilizing Voith technology for its turbines, generators, excitors, and various auxiliary systems.
Pico residents were able to view and comment on the wastewater recycling project, as well as offer suggestions for the design and incorporation of community amenities. WRD has made no promises, but assures residents their concerns will be considered in the final plans for the project.