Sewage Pump Manufacturers
Looking to connect with a sewage pump manufacturer?
Sewage pumps are used in many different applications including private homes, commercial buildings, sewage lift stations, and sewage treatment plants. Generally, they can handle solid sizes ranging from 2 inches to 6 inches for larger municipal systems, but it is very important to analyze your system to determine the right sewage pump size. That’s were a pump manufacturer can help.
A sewage pump manufacturer can work with you to determine the right pump type and size for your application. They can also make recommendations for installation.
PumpScout works with several suppliers. We have listed a few below, but you can also use the search module to the right of this page to connect with additional companies.
More information about sewage pumps:
The primary function of sewage pumps is to move solid and liquid sewage to a higher elevation. Most are considered centrifugal submersible pumps, where the pump and motor are encased in a hermetically sealed chamber. The machine sits at the bottom of the sump that is used to capture sewage, and it automatically turns on when the sewage rises high enough to trigger the power mechanism. In smaller sewage pump systems, the process is automated. There is an attached floating bulb that turns on the power when it rises above a certain level, and the power goes off when the bulb lowers below the shut-off level.
So now what do you do? As many of you know, this is a fairly common occurrence, particularly with pumps that have been around a long time. Here's some advice on what to do.
Incorrectly installed suction and discharge piping can create stresses on the pump casing and thus reducing the reliability of the seal and bearings. Read tips on how to eliminate this occurance.
Learn how following the simple rule of NPSH Available > NPSH Required, can help you avoid cavitation.
Franklin Electric recently announced that it completed its acquisition of a majority stake of Pioneer Pump Holdings Inc., the holding company for Pioneer Pump Inc. in Canby, Oregon and Pioneer Pump Limited in Rattlesden, England.
Double hose-diaphragm pumps in quintuplex configuration guarantee minimum pulsation and wear. German pump manufacturer Feluwa's Multisafe double hose - diaphragms pumps make easy work of moving aggressive or abrasive products long distrance, according to a company news release.
Pump manufacturer Grundfos A/S earned the Productivity 2012 Award from the Confederation of Danish Industries, the company recently announced.
Graco introduces a new hose pump that uses a single, oversized roller that compresses a low friction hose through a full 360-degrees of rotation. This design can put 40% less stress on the hose compared to conventional shoe pumps running at the same flow rate. The pump also has 50% more fluid flow per revolution than C-shape positive displacement pumps.